Setting up wireless TRENDnet® router
A router is a type of electronic device that help and provide complete support to interconnected computer networks. The routers help to interconnect two or more networks and selectively interchange packets of data between them. The data packets associated with it contain address information, which a router can use to determine if the source and destination are on the same network, or if the data packet must be transferred from one network to another. When multiple routers are used in a large collection of interconnected networks, the routers help in exchanging information about target system addresses, such that each router can build up a table showing the preferred paths between any two systems on the interconnected networks. TRENDnet provides you with a wide range of advanced routers that offer you perfect connectivity. They provide you with greater coverage, advanced encryption and you can get the fastest speeds for all your wireless activities.
- Wireless connection
- Connect TRENDnet wireless router
- Configure your TRENDnet wireless router
The wireless connection refers to the transfer of data or data packets from one device to a compatible receiver device without the use of any physical cables or wires. The wireless connection transfers data or packets wirelessly over compatible devices. Your TRENDnet router is a wireless network device that helps in interconnecting various supported computer network devices with computers or other devices that support the wireless connectivity.
Connect TRENDnet wireless router
You can plug in the Ethernet cable to the WAN port of your TRENDnet router from your cable modem and after this you can connect a different Ethernet cable between your PC and the Trendnet router. Now, you can plug in the power of the router and turn on your computer. You will need to wait for a short time as it may take about two minutes for your router to boot. Then you can check that your WAN light is ON and that the port light that you plug the computer is ON.
You need to navigate to your network settings by clicking 'Start', choose 'Control Panel', select 'Network and Internet Connections' and then click on the 'Network Connections' icon. There you can locate and double-click the 'Local Area Connection' icon for the Ethernet adapter that is connected to the Wireless Barricade. Then, click the 'Properties' button and in the Local Area Connection Properties box, verify that the box next to Internet Protocol (TCP/IP) is checked. After that highlight 'Internet Protocol' (TCP/IP), and click on the 'Properties' button and select the 'Obtain an IP address automatically' option to configure your computer for DHCP. Then you can click the 'OK' button to save this change and close the 'Properties' window and restart your computer.
iYogi is the fastest growing online and remote tech support provider in the direct-to-consumers and small businesses sector. Our highly skilled and experienced tech experts available, 24x7x365 will provide the best issue resolution and customer satisfaction. Our award winning and low priced Annual Subscription covers the following services:
- Comprehensive support for configuring TRENDnet wireless router.
- Diagnostic & repair for your technologies.
- Troubleshoot software errors.
- Update drivers and security to protect against online threats.
- Connect to Internet, devices and peripherals.
- Optimize your computer’s speed and performance.
Unlimited access to great tech support, all year around! We promise the lowest wait-time and highest resolution rate in the industry.